Завод
вулканитовых изделий
Тел./факс:+7 (84241) 2-58-55
E-mail:info@vulkanit.com

Heat-setting mortar «Vulkanit»
Technical Standards 5716-004-87796306-2014

It is a dry masonry heat-insulating admixture of binders, fillers and special additives.

Admixture is used for laying masonry heat-insulating materials (bricks, building materials) working at temperatures as low as 600°С.

Heat-setting mortar is characterized by the following properties: 1) quality of dry mixes; 2) mixes ready for applying, and 3) stone mortar physicochemical and performance characteristics of heat-setting mortar

Physicochemical and performance characteristics of heat-setting mortar


No

Quality indicators

Unit

Rating:

V-20

V-21

Quality indicators of dry mixes:

1.

Bulk density

кg/m3

<525

2. Humidity % 2
3. The biggest size of coarse aggregate mm 5
4. содержание зерен наибольшей крупности % <5
Quality indicators of ready-to-use mixes:
5. Water-holding capacity % >95
6. Application life min. 120 60
Quality indicators of stone mortar:
7. Density of stone mortar кg/m3 840 810
8. Compression capacity after 28 days, not less than MPa >2 >2,5
9. Tensile strength in bending, not less than (28 days) MPa >0,5 >0,6
10. Linear shrinkage of stone masonry mortar % <2 <1
11. Heat conduction of stone mortar at 25 С W/m х К <0,12 <0,10

The represented data is the result of tests conducted by standard methods for heat-insulating and fire proof materials.

Heat-setting mortar is packed into multilayer kraft paper bags per 20 kg

Packed heat-setting mortar is transported by car, rail and other modes of transport. The mode of transport should prevent from rainfall, damages and secure package integrity.

Heat-setting mortar should be stored in the bags avoiding moisturization in the indoor warehouse with relative humidity no more than 60%. The shelf life of the package is 12 months from the date of production.

Mortar preparation: 18L of water per 20 kg. Mix it up carefully having proper consistency.

Add some water if necessary and mix it up once again.

The recommended thickness of laying is 3–5 мм